We're giving this page a facelift!
Visit the previous versionto make edits.
Peak Mountain 3

Peer Pressure

FA Richard Wright, Fall 1994 FFA A. Nelson , R. Wright, 1995
CREATED 
UPDATED 

Description

Peer Pressure starts off the ledge below the main dihedral that marks the center of the Highlander crag. The left side of the dihedral is marked by a flaring crack for 20 feet. Two routes start on a flake that leads into the crack and diverge where there crack ends, 20 ft above. The crack itself is a bit dirty, although it has cleaned up with use. Peer Pressure fires up and left at the top of the crack.

Peer Review

stays on the face. The crack section overhangs and flares, so the start of both routes is probably solid 5.11d. I find it still to be strenuous after many, many trips up this route. Turn the corner on the left above the crack on Peer Pressure for about 5.12a and enter a short, right-facing dihedral with a good chance to chill. The top of the dihedral segues into a wide stemming problem on smears and poor feet for another 5.12a section. This is very well bolted and offers little chance for a fall, so just focus on keeping the smears working. Chase up to a small roof with an in-obvious solution and a stretch of 5.11, four more clips, and the anchor. Three stars for the varied climbing overall, the continuity, and the largely excellent rock.

Protection

QD only. This 100 foot route needs 13 to 14 draws and something for the double bolt anchor at the top. A 60 m rope is mandatory unless you are climbing on double ropes.

Caution: the route is 100 feet from the anchor to the starting ledge, not to the ground!!